Business Water Explained: SPIDs, Meters and How You're Billed

Most business owners in Glasgow can tell you roughly what they pay for water. Far fewer can tell you what a SPID is, whether their premises is metered, or why their bill has four separate charges on it for what feels like one service.
That matters, because the businesses that overpay for water are almost always the ones who never looked closely at the bill. When we review a new client's water account at COLABR8, the first ten minutes are spent decoding it. This post is that ten minutes, written down.
By the end you'll know what every reference number on your bill means, how your usage is actually measured, the difference between metered and rateable value billing, and the handful of things worth checking before you sign another renewal.
What is a SPID?
A SPID is a Supply Point ID: the unique reference for your premises' connection to the water network. Think of it as the water equivalent of an MPAN on your electricity bill. It identifies the supply point, not you and not your supplier, so it stays the same when you switch retailer.
Most premises have two:
- A water SPID for the clean water coming in
- A wastewater (sewerage) SPID for what goes out
SPIDs are a run of digits followed by a letter: W for water, S for sewerage. In the Scottish market a SPID typically begins with a 1 or a 2, while English SPIDs begin with a 3, which is a quick way to tell which market a bill belongs to. (AquaSwitch)
Where to find it: on your bill, usually alongside the meter readings and the charges breakdown rather than on the front page. If you can't find it, your current retailer can look it up from your meter serial number or address.
Why we ask for it: every quote we obtain is tied to the SPID. It's how the retailer confirms the exact supply point, pulls the wholesale charges for that site, and submits the switch. A wrong or missing SPID is the single most common reason a switch stalls, so we'd rather have it on day one.
What is a meter serial number?
The meter serial number is the ID stamped on the physical water meter itself. It's separate from the SPID: the SPID identifies the connection, the serial number identifies the piece of kit measuring it.
Where to find it: on the face of the meter, usually a mix of letters and digits printed near the dial or digital display. The meter is normally in a chamber under a small cover in the pavement outside the premises, or occasionally inside near where the supply enters the building. It should also appear on your bill next to the readings.
Why it matters: the serial number on your bill should match the serial number on the meter in the ground. When they don't, you are being billed from someone else's meter, or from a meter that was replaced and never updated in the market records. We have seen both. A mismatch means every reading, every estimate and every invoice since the error started is wrong, and sorting it out involves the wholesaler, not just the retailer.
If you do one thing after reading this post, lift the cover, photograph the meter, and compare the serial number to your bill.
How is business water measured?
Metered water is measured in cubic metres (m³). One cubic metre is 1,000 litres, roughly 12 baths or 3,000 cups of tea. Your bill shows a previous reading, a current reading, and the difference, which is what you're charged for.
Meter size matters as much as usage. Meters are sized by the diameter of the connection: 15mm or 20mm for most small premises, 25mm and up for larger sites. The fixed (standing) charge on your bill is set by meter size, so a premises on a 25mm meter pays a higher daily charge than one on a 20mm meter even if they use the same water. If your meter is bigger than your business needs, that's a cost worth challenging.
Actual vs estimated readings. Retailers are only required to take an actual reading twice a year. In between, bills are estimated from your past usage. Estimates are where the trouble starts: a quiet period followed by a catch-up reading can produce a bill several times larger than normal, and an over-estimate means you're funding the retailer's cash flow until the next real reading. You can submit your own reading to most retailers online or by phone, and we'd encourage clients to do it monthly.
Reading the meter yourself. Most meters show black digits for whole cubic metres and red digits (or a dial) for fractions. Read the black digits left to right and ignore the red. Only lift the cover if it's safe to do so.
Metered vs rateable value billing
There are two ways a Scottish business gets charged for water, and which one you're on makes a bigger difference than which retailer you're with.
Metered
Rateable value (unmetered)
How usage is charged
Per cubic metre, from meter readings
A set annual charge based on your premises' rateable value
Fixed charges
Daily rate set by meter size
Daily rate set by connection size
Billing pattern
Monthly or quarterly, in arrears
Usually one annual bill, issued early in the year, payable by instalments
Who it suits
Businesses whose water use is low or moderate for the size of premises
Businesses that use a lot of water relative to their rateable value
How to change
Can apply to be reassessed to RV in limited cases
Can apply for a meter via your retailer; Scottish Water decides
Rateable value billing uses the RV set by the Scottish Assessors, the same figure used for business rates. It has nothing to do with how much water you use. A solicitor's office and a hairdresser in identical units next door to each other pay the same water charge on RV, even though one uses a fraction of the water. (Business Stream)
Metered billing charges what you actually use plus a fixed daily charge. For most offices, shops and professional premises, metered works out cheaper. For high-use premises such as laundries, car washes, food production or anything with a high RV but low water use, it's worth running the numbers both ways. We go into more depth in What's the Difference Between Metered Billing and Rateable Value Billing?
One thing to watch in 2026: new rateable values came into force on 1 April 2026 following the Scottish revaluation. If your premises is on RV billing and your RV went up, your water bill went up with it, regardless of usage. If you've never checked whether a meter would be cheaper, this is the year to do it. We run the comparison as part of every bill review.
What else is on the bill?
A business water bill in Scotland is really four or five services bundled together. Knowing which is which is how you spot the ones you shouldn't be paying.
- Water supply. The clean water in. Fixed daily charge plus volumetric charge if metered.
- Wastewater (sewerage). The water out. Also a fixed charge plus a volumetric charge, but the volume isn't measured separately. It's assumed to be a percentage of the water in, usually 90% to 100%, called the return-to-sewer allowance. If a lot of your water doesn't go down the drain (irrigation, water in your product, evaporation from cooling), you can apply to have that percentage reduced.
- Property (surface water) drainage. The charge for rainwater running off your roof and yard into the public sewer. Based on rateable value. If your premises drains to a soakaway, watercourse or private system rather than the public sewer, you may be entitled to have this removed. This is one of the most commonly overlooked savings.
- Trade effluent. Only applies if you discharge anything other than domestic-strength wastewater: food processing, manufacturing, vehicle washing, laundries. Charged by volume and strength under a consent from Scottish Water. If you have it, make sure the consent reflects what you actually discharge.
- Wholesale vs retail. Every one of the charges above has a wholesale element, set by Scottish Water and identical for every retailer, and a retail element, which is the retailer's margin. Some retailers show the two separately on the bill. Most blend them into a single rate, which is harder to compare. We wrote more on why that matters in Cheapest Business Water Suppliers in Glasgow: What Actually Saves You Money.
The problems we see most often on Glasgow bills
When a new client sends us a water bill, these are the things we check first, in order of how often they turn up:
- Out-of-contract or deemed rates. The business moved in, or the fixed term ended, and nobody signed anything. The default rate is almost always the most expensive one the retailer offers.
- Estimated readings that never caught up. Months of estimates, then a large catch-up bill or an over-estimate the business is quietly funding.
- Surface water drainage charged where it shouldn't be. Premises that don't drain to the public sewer, still paying for it.
- Meter size larger than the premises needs. A higher fixed charge every single day, for capacity never used.
- Wrong meter serial number on the account. Readings from the wrong meter, sometimes for years.
- Multiple SPIDs for a site, one of them on a different retailer. Common after a change of tenancy or a partial refurbishment.
- Return-to-sewer at 100% for a business that doesn't return anything like that.
None of these need a new supplier to fix. Several of them need a conversation with the wholesaler, which is slow and tedious and exactly the kind of thing most business owners put off. It's also the kind of thing we do. If you're weighing up water alongside your other utilities, our guide to the best business utilities providers in Glasgow covers the wider picture.
Ready to find out what you're actually paying?
If you've read this far, you now know more about your water bill than most of the people who send them out. The next step takes two minutes.
Book a call and we'll walk through your bill with you, or send us your latest water bill and we'll come back to you, usually the same day, with a plain-English breakdown of what you're paying, anything that looks wrong, and what the market would charge for the same supply.
No cost, no obligation, no pressure to switch. If your bill is fine, we'll tell you it's fine.
COLABR8 is a Glasgow-based business services broker handling water, electricity, gas, telecoms and connectivity for businesses across Glasgow, Paisley and the West of Scotland.
Call us on 0141 378 8004, book a call or contact us online.
